Add: Mechanical&Electrical Industry Zone,Yuhuan,Zhejiang,China
The fuel pump is a technical term for the auto parts industry. Fuel injection system is one of the basic components of efi vehicles, the vehicle fuel tank, fuel pump in the start and work when engine is running, if the engine stops and the ignition switch is still ON, HFM - SFI turning off the power of the fuel pump control module, in order to avoid accidental ignition.
The fuel pump is used to pump the fuel from the fuel tank, feed it to the fuel line, and build certain fuel pressure with the fuel pressure regulator.
Fuel pump by an electric motor, pressure limiter, check valve, the practical work of electric motors in the fuel oil pump shell, don't worry, because there is no any shell to ignition, fuel can lubrication and cooling motor fuel, oil outlet is equipped with check valve, the pressure limiter is in the pressure side of the pump shell, with to the inlet channel
When the rotor rotating, roller pressure outward by centrifugal force, like a rotary oil seal, the rotor rotation, the pump work, from the fuel oil inlet suction, and the fuel oil from the oil outlet pressure into the fuel oil system, when close the oil pump, oil outlet check valve closed, to prevent fuel through back to the fuel tank, fuel pump flow check valve to maintain the fuel pipe pressure is called the "residual pressure".
The maximum pump oil pressure of the fuel pump depends on the standard of the pressure limiter. If the fuel pump pressure exceeds the predetermined pressure limit, the pressure limiter will open the bypass to bring the fuel back to the inlet of the fuel pump.
ZYB type ignition pressurization pump is applicable to transport diesel oil, heavy oil, residual oil, fuel oil, such as medium, especially suitable for the mixing Station Road and bridge engineering in the burner fuel pump, is an ideal product to replace imported products.
The ZYB type supercharged fuel pump is not suitable for conveying highly volatile or low-flash liquid, such as ammonia, benzene, etc.
The electric fuel pump is a device that continuously pumps fuel out of the tank and provides the fuel system with fuel for the pressure and flow. Based on the function of electric fuel oil pump, the performance of electric fuel pump can directly affect the performance of the engine.
The electric fuel oil pump is the heart of the fuel supply system of the electric jet engine. The electric fuel oil pump has two kinds of arrangement in the oil supply system, one is the external loading type, which is the fuel oil pump series in the pipeline. The second is internal loading, that is, the fuel pump is installed in the fuel tank, submerged in gasoline, so the fuel pump is easy to dissipate, small work noise, long service life, so it is widely used
(1) inside the electric fuel pump parts (such as roller type fuel pump piston and cylinder) of very precise, so the key to prolonging the service life of the fuel pump is to keep the height of the fuel oil cleaning, regular cleaning everywhere and in accordance with the requirements of the use of maintenance screen (note that cannot be used with fiber cloth cleaning), in order to prevent the fuel pump is impurity binding or early wear.
(2) for an internal electric fuel pump, it is prohibited to force the engine to be activated when the oil tank is not in oil. Take out the fuel pump from the fuel tank to do the experiment, and the time of each charge cannot exceed the 6s, because the time of the ungas-free cooling is too long, which can lead to the burning of the motor winding of the fuel pump.
(3) because the electric fuel oil pump is integral package, it belongs to the non-repair parts, and the same type of fuel pump should be replaced once the damage is done. If the type of fuel pump replacement is different, it may be that the pump pressure cannot meet the original requirements and lead to the abnormal performance.