Add: Mechanical&Electrical Industry Zone,Yuhuan,Zhejiang,China
Flow Control Valve: The flow rate is adjusted by adjusting the orifice area between the spool and the valve body and the local resistance generated by it, thereby controlling the speed of movement of the actuator. The flow control valves are divided into five types according to their purposes. (1) Throttle valve: After the throttle port area is set, the moving speed of the actuator which can make the load pressure change little and the motion uniformity requirement is not high is basically kept stable. (2) Speed control valve: The pressure difference between the inlet and outlet of the throttle valve can be kept constant when the load pressure changes. Thus, after the orifice area is set, regardless of the load pressure, the speed control valve can maintain the flow rate through the throttle valve, thereby stabilizing the moving speed of the actuator. (3) Diverter valve: Regardless of the size of the load, the two actuators of the same oil source can be equal flow valve or synchronous valve; the proportional distribution valve is proportionally distributed. (4) Collector valve: The action is opposite to the diverter valve, so that the flow into the collector valve is proportionally distributed. (5) Split flow collecting valve: It has two functions of diverter valve and collector valve.
Previous: No Information